Hi folks,
Well, a typical Monday mornin'. I whipped out my deca & test and a new pin, and I guess the pins're too skinny cuz I could push air into the vials but couldn't get anything out. I wound up blowin' the tops off both vials and spillin' gear all over. Damn, and I haven't seen deca 275 or test 200 anywhere, and I'm so poor I couldn't afford a free meal anyway, so I be screwed on that end. Oh well; a little therapy, a little glue, I'll learn to cope, ha ha. Now I have 99 syringes I can't use unless I can get the right size pins for 'em. Will somebody tell me what size pins I need to order (from needlebeast)? Thanks loads for any help.

bro you can heat your oil up abit it will thin it out making it easier to get into the syranges thats what i do

I do everything with a 3ml 22x1 1/2 plus what talon said about heating up the gear

i like to use 23's for glutes and 25's for smaller muscle groups. 1.5" always unless pinning small muscles close to bone, then 1" does the trick for me.

I use an 18 gauge pin for drawing the liquid out of the bottle and a 23-25 gauge pin for shooting.

I use 25g 1 inch needles on 3ml Syringes. These are great; Versatile, good for drawing and injecting, So I stock up on them.
Only problem Ive ever had was Winny Inject, becaseu of the thickness. Otherwise They are your best bet.

Or you say your were about to place an order; Try a few different siszes and see what works best for ya.

Thanks guys, I guess ya gotta be smarter than the needle, ha ha. Oh well, I just got back from a kick ass upper day--punishin' myself for bein' such a idjut. (Couple lousy phone calls when I got home too. Jeeze man, I've had better days in a coma.) I'll hafta see what I got and order better next time. Can't wait to try the heat thing, it's free and right here.

heating will work what i do is get a small bowl and fill it with warm water then set the vial inside let it sit for a good 2 min then draw the liquid out let it sit in the syringe and inj just make sure the oil isnt gonna cook you when you inj lmao DONT ASK

HI, I was trying to use 23 g needles for the axio "winny" and had some trouble pulling and pushing it. I tried a 21 g pulled no probs.. but I don't want to have to use a cannon everyday for 40 days... does anyone know offhand if heating winny helps with this problem? I know that the suspended material is what's getting stuck... but never hurts to hear what others have to say.. thanks

Bump this, exactly what I do. Using an 18g to draw makes it take 1/2 the time of a 23g!